• The basic composition is 18% chromium and 8% nickel element

• Not magnetic, no magnets

• Hardening and heat treatment not applicable

• Very good corrosion resistance

• hygienic

• Good weldability.

• Cold forming is very good

• Resistant up to 850 ºc.

• The structure used in machine construction consists of Stainless Steel, Cestamide and polyethylene equipment in accordance with food standards.

• Stainless Steel Spiral tapes are our own production.

• Made of AISI 304 stainless steel wire.

• Resistant to rust, oil resistant, corrosion resistant, flat surface, carrying resistance, high temperature resistant, cold resistant.

• Suitable for spiral, round and flat conveyors.

• It is wider, faster and more powerful than other products on the market.

• Spiral or flat conveyors, spiral wrapped bread, pasta, vegetables, potatoes, fish and meat, such as making presentations, cooling or freezing opportunities for.

• Material AISI 304 stainless steel wire braided tapes in lines, air passage is allowed. Therefore, all its areas are a uniform air flow.

• According to the product and production process, the wire mesh is intermittent.

• The appropriate band is selected and produced in suitable sizes between 130 mm and 1000 mm.

• Spiral impact applications - 40 ° C degree cabin range will work and the product with the possibility of rapid multiplication, the spiral tape for air permeability is a very good strength and transfer transfer for fast shocking.

• Spiral tapes can be manufactured only for rods with larger volumes.

• Automatic control design and production before cooling, freezing and drying systems

• Used in Small,medium and large sized air conditioning systems and special industrial processes

• Copper Pipe / Diameter / Wall Thickness
  9,52 - 12,7 - 15,875 mm / 0,35 - 0,40 - 0,50 mm 

• FIN SPACING Fin Spacing
  1,8mm -4mm 

• Coating Galvanized Metal Sheets Aluminum Stainless Steel Metal Sheets

• Tests is performed with nitrogen gas under 15 bars of pressure
   

• Capacity range of the standard models is between 0.5 and 337 kW. 

• Fan sound pressure levels are in accordance with EN 13487 and for 10 m distance from center of the units. For different distances, correction factors should be used. 

• Highly efficient heat exchanger coils, designed with special computer softwares, are made of copper tubes and aluminum fins as standard. 

• Fin spacings are 2.1, 2.3, 2.5 and 2.8 mm. 

• Depending on the working environment and design, epoxy coated aluminum fins, complete epoxy coated coils, copper fins and grooved tubes are available as options. 

• Collectors are made of copper and have schrader valves. 

• Refrigerant circuits are optimized for commonly used refrigerants (R404A, R507, R22, R134A, R407, etc.) 

• Test pressure is 34 bars and delivery of the products is under positive pressure. 

• Energy efficient and low noise fans are used. Arrangement of the fans up to 1x4 for single row and 2x6 for double rows. Fan Motor protection classes IP44 and IP 54, Insulation class B and F . 

• Powder painted galvanized is steel used for casing and standard color is RAL 7044. Different colors can be applied on request. 

• Adiabatic/evaporative cooling systems such as direct water spray, water spray on mesh, fogging, humidification pads can be applied as options. 

• Subcooling circuit, fan speed control systems, electrical panels, EC fans, measuring instruments, service flaps, on-off switches, vibration dampers, etc. equipment are available as options. 

• All of the materials are in high quality and long term durability. 

• The products, designed by special computer softwares, have competitive advantages based on initial investment and operating costs. 

• Products, designed as robust, have long industrial life. There is no service requirement provided that usages of the products are in accordance with the instructions. 

• Air cooled condensers have GOST certification. Air cooled condensers are manufactured with the latest technology in ISO 9001:2008 quality assurance system.

• Standard catalog capacities are for R404A refrigerant and according to Eurovent and EN 328 standards. 

• Fan sound pressure levels are in accordance with EN 13487 and for 3 m distance from center of the units. 

• Highly efficient heat exchanger coils, designed with special computer softwares, are made of copper tubes and aluminum fins as standard. 

• Fin spacings are 4, 6, 8 mm. 

• Depending on the working environment and design, epoxy coated aluminum fins, 

• complete epoxy coated coils, copper fins and grooved tubes are available as options. 

• Collectors are made of copper and have schrader valves. 

• Refrigerant circuits are optimized for commonly used refrigerants (R404A, R507, R22, R134A, R407, etc.). 

• Test pressure is 34 bars and delivery of the products is under positive pressure. 

• Energy efficient and low noise fans are used. Motor protection classes IP44 and IP 54, Insulation class B and F . 

• Powder painted galvanized is steel used for casing and standard color is RAL . 

• Defrost System: 

• Light Defrost System: Suitable for SC1 and SC2 conditions. Heaters are on the coil. 

• Heavy Defrost System: Suitable for SC2-SC4 conditions. Heaters are both on the coil and the drain tray. 

• Drain line heater, fan grill heater, hot gas defrost and water defrost are optional. 

• Fan speed control systems, electrical panels, EC fans, measuring instruments, on-off switches, textile hose connections, 

• air streamers, defrost flaps, insulated drain tray, wall mounting brakets, etc. equipment are available as options. 

• All of the materials are in high quality and long term durability. 

• The products, designed by special computer softwares, have competitive advantages based on initial investment and operating costs 

• Products, designed as robust, have long industrial life. 

• Our standard production consists of 40 (+/- 2) density polyurethane injected locked panels of which the top surface is 10 mm thick plywood and bottom surface is galvanized sheet. Ribbed surface panels come in 7 different thicknesses, same as in the case of wall / ceiling panels. Ribbed panels have a load capacity of 2,000 kg/m2 and non-slip CrNi or 200-micron PVC coated steel sheet can optionally be used on top of the plywood.

• Panel Width (cm)    30 - 40 - 50 - 111
  Panel Thickness (mm)    50 - 60 - 80 - 100 - 120 - 150 - 180 - 200
  Panel Density    40±2 kg/m³
  Sheet Coating Types    Polyester - PVC - CrNi
  Color    RAL 9002
  Pattern    Ribbed - Flat
  Insulation    Polyurethane
  Sheet Thickness (mm)    0,50 mm

• This is a stainless steel body panel,
   

• This is a stainless steel body panel, on which all functions of the system are controlled.Its command is practical and easy due to its programmable structure with PLC and Oprerating Panel

• Inside the cabin,there are electrical sensors at critical points in orders to prevent damage to the conveyor belt and the system and to provide work safety

​

•  Products , completing in very short time their heat processing, are taken from the exit of the cabin and prepared for storage or delivery.